5-Way, Multi-User, Portable Dust Colletion System to confirm with OSHA Directove 1926.115 for Crystalline Silica containment. This compressed air powered system can be used with compressed air powered tools or electric tools. It can be used with percussion tools, drills, saws or grinders, and each line is deisgned to work with one tool at a time. The unit requires approximately 245cfm of compressed air at 90psi (pressure required for most air tools to operate properly) to create the suction (vacuum) needed to draw the dust away from the work being perofrmed. This compressed air requirement is brown down as follows:
- Each lines uses a TX-2AM Mini Air Mover to create suction (vacuum)
- Each Mini Air Mover uses approximately 40cfm at 90ps
- If all 5 lines are being used, then a total of 200cfm is required.
All 5 vacuum lines merge into one shroud that is attached to a TX-3AM-P Air Mover. This air mover is used to deliver the collected dust from all 5 vacuum lies to the filter, and it uses approximately 45cfm of compressed air at 90psi.
The TX-DCS-MU5 will allow up to 5 workers on one system. The TX-DCS-MU5 comes wiht 5 vacuum hoes (25' each), 5 vacuum hose whips (5' each), 5-TX-2AM Mini Air MOvers, a HEPA filter, and Cyclonic filter, 30' of 8" Ducting and the folling cart. The 2" vacuum hose can be adapted to any vacuum port on any tool. Adaptors sold separately.
FEATURES
- Conforms to OSHA Standard 1926.1153
- Filters down to .3 microns with 99.97% efficiency
- The system can be located within a 30' radius from work area to lessen possible silica exposure
- The cyclonic pre-separator removes more thatn 90% of dust and debris prior to the HEPA filter
- Works with all air powered tools or electric tools
- Portable and easily manuvered around worksite
- HEPA filter has a 2 to 3 year life expectancy and can be washed
- The dirt and debris can be thrown awa (No wet slurry that requires additional disposal practices and costs)
- Virtually maintenance free - No moving parts
- MADE IN USA
SHIPPING
- $150 Flat Rate LTL/Truck Shipping to Commercial destinations*
- $250 flat rate for Residential destinations in Continental US. Rates will be quoted for Alaska, Hawaii and all international destinations.
SPECIFICATIONS
No of users /Unit |
|
5 |
Vacuum Air Flow |
cfm |
2150 (430 each) |
Vacuum Suction |
in of H²O |
42 per line |
Compresses Air Consumption |
cfm |
245 |
Vacuum Hose Length(5 x 25' and 5 x 5' sections, and 1 x 30' ducting section) |
ft |
60 |
Hose Dia./Connector |
in |
2 |
Canister Size |
gal |
20 |
Filter Type |
|
HEPA |
Length |
in |
59 |
Width |
in |
30 |
Height |
in |
80 |
Total Weight, including vacuum hoses & TX-2AM Air Movers, & Cart |
lbs |
332 |