888-883-5144
303-433-5144

Post Driver Tools

 

shank and head apart

Detachable shanks are used with driving heads, cups, sheathing driver shoes, and tamper pads. Although known as "Detachable Shanks", the name is misleading. Once a shank is mated to its female counterpart, it will be nearly impossible to separate them.

Made in USA


Detachable Shank
Shank Size Description Detachable Shank Price
7⁄8" X 31⁄4" Large Taper PB77-DS $76.50
7⁄8" X 41⁄4" Large Taper PB78-DS $79.10
1" X 41⁄4" Large Taper PB88-DS $76.50
11⁄8" X 6" Large Taper PB98-DS $76.50
11⁄4" X 6" Large Taper PB108-DS $76.50
11⁄8" X 6" Large Taper - Slotted Shank PB98-DSSL $104.00

Detachable Shank works with...
Pipe Outside Diameter Pipe Inside Diameter
Square Drive Nose will run 1⁄32" smaller than pipe inside diameter.		   Pipe outside diameter
Cups will run 1⁄32" larger than pipe outside diameter.		   Pipe Inside Diameter
Round Pipe Drivers Pins will run 1⁄32" smaller than pipe outside diameter. 
          11⁄4" PD-LT-32CUP $121.00   11⁄4" PD-LT-32PIN $121.00
13⁄4" 11⁄2" PD-LT-38SQ $134.00   11⁄2" PD-LT-38CUP $121.00   11⁄2" PD-LT-38PIN $121.00
2" 13⁄4" PD-LT-45SQ $134.00   2" PD-LT-51CUP $121.00   2" PD-LT-51PIN $127.00
21⁄4" 2" PD-LT-51SQ $134.00   21⁄4" PD-LT-57CUP $127.00   21⁄4" PD-LT-57PIN $127.00
21⁄2" 21⁄4" PD-LT-57SQ $194.00   21⁄2" PD-LT-64CUP $127.00   21⁄2" PD-LT-64PIN $127.00
23⁄4" 21⁄2" PD-LT-64SQ $194.00   23⁄4" PD-LT-70CUP $127.00   23⁄4" PD-LT-70PIN $127.00
          3" PD-LT-76CUP $141.00   3" PD-LT-76PIN $128.00
          4" PD-LT-102CUP $281.00        
Shank Size

U-Channel and Pipe Drivers
7⁄8" X 31⁄4" Shank only PD77-PIPE $112.00
7⁄8" X 4 1⁄4" Shank only PD78-PIPE $113.00
1" X 4 1⁄4" Shank only PD88-PIPE $113.00
1 1⁄8" X 6" Shank Only PD98-PIPE $113.00
1 1⁄4 X 6" Shank Only PD108-PIPE $113.00
Cup Cup only - 2-5⁄8" ID

PD-PIPE-CUP

 $141.00
Pad Size tamping pads Tamping Pads
3 " Round PB-TAMP-LT-3RD $94.00
4 " Round PB-TAMP-LT-4RD $106.00
6 " Round PB-TAMP-LT-6RD $127.00
Square PB-TAMP-LT-6SQ $131.80
7 " Round PB-TAMP-LT-7RD $131.80
8" Square PB-TAMP-LT-8SQ $156.50
Sheathing Shoesheathing shoe
2" PB-SHOE-2 $301.70
3" PB-SHOE-3 $314.80

Manual Drive Squares, Cups, and Pins are used to protect posts while driving with a sledgehammer.



Manual Drive Squares will run 1⁄32" smaller than pipe size
Pipe Size
I.D.		 Material Size
O.D.		 Part No. Price
11⁄2" 31⁄2" PD-M-38SQ $134.00
13⁄4" 31⁄2" PD-M-45SQ $134.00
2" 31⁄2" PD-M-51SQ $134.00
21⁄4" 4" PD-M-57SQ $194.00
21⁄2" 4" PD-M-64SQ $194.00

Manual Drive Cups will run 1⁄32" larger than pipe size
Pipe Size
I.D.		 Material Size
O.D.		 Part No. Price
21⁄2" 31⁄2" PD-M-64CUP $127.00
3" 31⁄2" PD-M-76CUP $141.00

Manual Drive Pins will run 1⁄32" smaller than pipe size
Pipe Size
I.D.		 Material Size
O.D.		 Part No. Price
11⁄2" 31⁄2" PD-M-38PIN $136.00
13⁄4" 31⁄2" PD-M-45PIN $136.00
2" 31⁄2" PD-M-51PIN $136.00
21⁄4" 31⁄2" PD-M-57PIN $136.00
21⁄2" 31⁄2" PD-M-64PIN $136.00
3" 4" PD-M-76PIN $136.00
4" 41⁄2" PD-M-102PIN $281.00

Pin Drivers
Working End 1 x 41⁄4" Hex Price 11⁄8 x 6" Hex Price 11⁄4 x 6" Hex Price
5⁄8" PB88-PD625 $110.70 PB98-PD625 $116.50 PB108-PD625 $120.80
3⁄4" PB88-PD750 $110.70 PB98-PD750 $116.50 PB108-PD750 $120.80
7⁄8" PB88-PD875 $110.70 PB98-PD875 $116.50 PB108-PD875 $120.80
1" PB88-PD100 $110.70 PB98-PD100 $116.50 PB108-PD100 $120.80
11⁄4" PB88-PD125 $185.90 PB98-PD125 $185.90 PB108-PD125 $185.90
11⁄2" PB88-PD150 $185.90 PB98-PD150 $185.90 PB108-PD150 $185.90
13⁄4" PB88-PD175 $185.90 PB98-PD175 $185.90 PB108-PD175 $185.90
2" PB88-PD200 $185.90 PB98-PD200 $185.90 PB108-PD200 $185.90
21⁄2"
Two Pieces		 PB88-PD250 $278.20 PB98-PD250 $278.20 PB108-PD250 $278.20
Shank
Size		 Rod
Size		 Socket
Size		 ground rod
Ground Rod
Driver 3" Depth
7⁄8" X 3-1⁄4" 5⁄8" 11⁄16" PB77-GR-625 $97.30
3⁄4" 13⁄16" PB77-GR-750 $97.30
1" 13⁄16" PB77-GR-100 $125.00
7⁄8" X 4-1⁄4" 5⁄8" 11⁄16" PB78-GR-625 $97.30
3⁄4" 13⁄16" PB78-GR-750 $97.30
1" X 4-1⁄4" 5⁄8" 11⁄16" PB88-GR-625 $97.30
3⁄4" 13⁄16" PB88-GR-750 $97.30
7⁄8" 15⁄16" PB88-GR-875 $110.10
1" 1-1⁄16" PB88-GR-100 $119.70
1-1⁄8" X 6" 5⁄8" 11⁄16" PB98-GR-625 $100.20
3⁄4" 13⁄16" PB98-GR-750 $100.20
7⁄8" 15⁄16" PB98-GR-875 $115.50
1" 1-1⁄16" PB98-GR-100 $126.30
1-1⁄4" X 6" 5⁄8" 11⁄16" PB108-GR-625 $110.60
3⁄4" 13⁄16" PB108-GR-750 $110.60
7⁄8" 15⁄16" PB108-GR-875 $123.70
1" 1-1⁄16" PB108-GR-100 $136.80

Custom One-Piece Tools Available

 

Pionjar Cobra Combi
7⁄8 X 4 1⁄4" Pionjar/Cobra Combi 1 piece driver
Working End Part No. Price
21⁄2" PB78-PIN-2500 $292.00
Pipe driver
7⁄8 X 3 1⁄4" Pipe Driver
Working End Part No. Price
11⁄2" PD77-PIPE-150 QUOTE

 

More Custom One-Piece Tools

Minimum order quantities apply. Contact us for more details.

Custom one piece shanks


Forgot password?