TX-DCS-MU3 Dust Collection System - Multi User

3-Way, Multi-User, Portable Dust Colletion System to confirm with OSHA Directove 1926.115 for Crystalline Silica containment.  This compressed air powered system can be used with compressed air powered tools or electric tools.  It can be used with percussion tools, drills, saws or grinders, and each line is deisgned to work with one tool at a time.  Each line requires approximately 40cfm of compressed air (120cfm total for all 3 lines) at 90psi (pressure requireed for most air tools to operate properly) to create the suction (vacuum) needed to draw the dust away from the work being performed. Only one line or all three lines can be used simultaneously.  

The TX-DCS-MU3 comes wiht HEPA and Cyclonic filers, 3 vacuum hoses (25' each), 3 vacuum hose whips (5' each), and 3-TX-2AM Mini Air Movers.  The TX-2AM Mini Air Movers are the vacuums.  These Mini Air Movers supply the suction needed to draw the dust away fromthe tool.  The 2" vacuum hoses can be adapted to any vacuum port on any tool.  Adaptors sold separately.

FEATURES

• Conforms to OSHA Standard 1926.1153
• Filters down to .3 microns with 99.97% efficiency
• The system can be located within a 30' radius from work area to lessen possible silica exposure
• The cyclonic pre-separator removes more thatn 90% of dust and debris prior to the HEPA filter
• Works with all air powered tools or electric tools
• Portable and easily manuvered around worksite
• HEPA filter has a 2 to 3 year life expectancy and can be washed
• The dirt and debris can be thrown awa (No wet slurry that requires additional disposal practices and costs)
• Virtually maintenance free - No moving parts
• MADE IN USA

SPECIFICATIONS