PD-55 Postmaster Driver for Postmaser and Plus Posts
For professional fence installer using the Master Halco® Postmaster and Postmaster Plus® Fence Systems, and similar type of post systems.
- Installed with PD-55 Postmaster Chuck and Adaptor to drive both original Postmaster Post and Postmaster Plus Post.
- Other PD-55 bolt-in adaptors can be sued with the Postmaster chuck - just remove the special Postmaster adaptor and replace with another PD-55 adaptor. SOLD SEPARATELY
- Already own a PD-55 - Just order the Chuck and Adaptor (70620)
- For more information on Master Halco Posts or to find a Master Halco dealer visit www.masterhalco.com
** FREE SHIPPING within the Continental United States
SPECIFICATIONS
| TOP COVER |
Ductile iron casting, high in strength and ductility has a 1" (25.4 mm) diameter handle designed into the cover for easy handling and carrying. O-Ring sealed. |
| BODY |
Ductile iron casting, with excellent wear resistant characteristics. The air inlet is cast into the body and tapped with 3/4" NPT female threaded ports, along with 1" (25.4 mm) diameter ergonomically designed side handles for easy handling and carrying. Chuck bolts pass thru the lower body flange into tapped holes in the chuck mounting plate allowing special chucks to be made in a wide variety of shapes and sizes. |
| PISTON |
Alloy steel heat treated with a ground surface with hard chrome plate. Designed with 2 round valve ports to give better lubrication and load distribution to the valve ring while running. |
| MASTER CHUCK & CHUCK ADAPTORS |
The 3 7/8" (98.4 mm) I.D. master chuck is of an all welded, reinforced steel and tubing construction. The chuck is equipped with extra long chuck adaptor attachment lugs. Standard chuck adaptors are available in the following sizes: 1" (25.4 mm) I.D., 1 1/2" (38.1 mm) I.D., 2" (50.8 mm) I.D., 2 1/2" ( 63.5 mm) I.D., 3" (76.2 mm) I.D., 3 1/2" (88.9 mm) I.D. and three channel post chuck adaptors for 1.2 to 1.5 lbs/ft, 2 to 2.75 lbs/ft and 3 to 4 lbs/ft posts. |
| FASTENERS |
S.A.E.Grade 5 bolts with belleville lock washers. All fasteners are plated. |
| AIR CONSUMPTION |
42 CFM (1.19 m3/min) @ 90 PSI (6.4 kg/cm2) |
| WEIGHT |
55 lbs. |
| HEIGHT |
21" |
ACCESSORIES AND ADAPTORS
| PD-55 Postmaster Chuck and Adaptor Drive Kit |
70620 |
|
|
|
| - PD- 55 Postmaster Chuck, Slotted Chuck |
70589 |
|
|
|
| - PD-55 Postmaster Adaptor (will only work with 70589 hardware) |
70677 |
|
|
|
| |
|
|
|
|
| Throttle Valve Kit with 5' Hose Whip |
600000 |
|
3½" ID Chuck Adaptor |
70609 |
| Filter-Regulator-Lubricator and Carrier pre-assembled |
225005 |
|
3" ID Chuck Adaptor |
70610 |
|
- Filter-Regulator-Lubricator
For operator safety and post driver protections
|
601128 |
|
2½" ID Chuck Adaptor |
70611 |
| - Carrier for Filter-Regulator-Lubricator |
225001 |
|
2" ID Chuck Adaptor |
70612 |
| CHUCKS |
|
|
1½" ID Chuck Adaptor |
70613 |
| PD-55 37/8" ID Master Chuck |
70592 |
|
1" ID Chuck Adaptor |
70614 |
| PD-55 4¼" Round Master Chuck |
70060 |
|
2" PD-55 Heavy Chuck Adaptor |
70615 |
|
4" x 4" Wood Post Chuck
(Chuck size 41/16" x 41/16")
|
70590 |
|
CHANNEL POST CHUCK ADAPTOR
|
|
| Custom Master Chuck Assembly |
70762 |
|
1.2 - 1.5 lbs/ft Posts |
70617 |
| MISCELLANEOUS |
|
|
2.0 - 2.75 lbs/ft Posts |
70618 |
| Transport Cart |
71201 |
|
3.0 - 4.0 lbs/ft Posts |
70619 |
| Hose Assembly - ¾" and up to 25' Hose. Includes assembly, labor and all parts EXCEPT hose. Order ¾" Extra Hose per foot 605006 |
607000 |
|
BREAK-AWAY SYSTEMS |
|
| ¾" Extra Hose - price per foot |
605006 |
|
PD-55 Chuck Adator for Channel POst Break-Away Anchor System |
70832 |
| Air Hose Assembly - 100' x ¾" |
100048 |
|
Driver Cap for the Channel Post Break-Away Anchor System |
70836 |
| |
|
|
PD-55 Chuck Adator for Square Tube Break-Away Anchor System |
71014 |
| DRIVE CAPS |
|
|
1¼" Low Drive Extension Drive Cap for Square Break-Away Bases 1" Pin |
71004 |
| 2" Drive Cap for Schedule 40 Pipe with T-Bar and Clip |
71260 |
|
1½" Low Drive Extension Drive Cap for Square Break-Away Bases 1¼" Pin |
71005 |
| 2½" Drive Cap for Schredule 40 Pipe with T-Bar and Clip |
71261 |
|
1¾" Low Drive Extension Drive Cap for Square Break-Away Bases 1½" Pin |
71006 |
| 3" Drive Cap for Schedule 40 Pipe with T-Bar and Clip |
71262 |
|
2" Low Drive Extension Drive Cap for Square Break-Away Bases 1¾" Pin |
71007 |
| |
|
|
2¼" Low Drive Extension Drive Cap for Squiare Break-Away Bases 2" Pin |
71008 |
| |
|
|
2½" Low Drive Extension Drive Cap for Square Break-Away Bases 2¼" Pin |
71009 |
DOCUMENTATION
