| Welder |
High frequency DC/CC welding, 270AMP at 100% duty cycle. CC: 40-300 AMP operating range, CV: 15-30V |
| Generator |
Totally brushless with capacitor, copper windings, bi-directional rotation, <6% distortion. Capacity 7 kW peak, 6.8 kW continuous, AC power, 60 Hz, single phase, 120V and 240V outlets |
| Compressor |
Vanair® encapsulated 40 CFM rotary screw air compressor system with clutch to eliminate horsepower consumption during unloaded condition. 40 CFM free air at up to 175 PSIG at high speed; 30 CFM free air at 175 PSIG at idle |
| Battery |
12V sealed lead acid - per DOT specification 49 CFR 173.159 |
| Boost/Charger |
300 AMP 12/24V battery boost, 50 AMP 12V charge |
| Engine |
Electric start diesel engine with automatic glow plugs, Kubota® model DH902, liquid cooled, tier 4 final, 25 HP with high teperature and low oil pressure shut down |
| Fuel Capacity |
With included 12V fuel pump, you can draw fuel from chassis tank (diesel only), or optional 12 gallon slimline tank. |
| Air Storage Tank |
4 gallon integrated |
| Air/Fluid Separator |
Separator to be externally mounted spin-on design. Vanair separator shall provide for enhanced air quality, reduced operating and maintenance cost and optimized compressor performance |
| Protective Circuit |
Compressor to automatically shutdown in case of high compressor temperature or over pressurization. Additional protective features provided include automatic blow down valve, compressor relief valve, air reeiver relief valve and minimum pressure valve. |
| Cooling System |
Compressor cooling system shall allow rated air delivery and pressure operation continuously in 110ºF ambient temperatures. Cooler to be mounted in a powder coated galvanneal sheet metal enclosure with a blower type fan assembly. Compressor fluid shall be filtered by a 25 micron full flow spin-on replaceable filter canister. A thermal valve is inlcuded to regulate compressor cooling. |
| Inlet Controls |
Electric inlet control valve shall be integrated into compressor system and automatically modulate output from 0 to 100% in response to air demand |
| Hydraulic Circuit |
Variable diplacement piston pump, capable of losed or open center hydraulic crane systems. Output is up to 13 GPM maximum pressure output is 3000 PSI. Rated at 10 GPM at 2000 PSI. |
| Truck/Body Interface |
Unti ban be remotely started from crane remote. Unit ties to chassis battery to keep batteries charged when running safety and work lights. Unit designed to pull fuel from chassis fuel tank |
| Weight - Dry |
852 lbs |
| Dimensions |
Unit - 47.1L x 21.0W x 33.4H in.
Unit with Fittings - 47.1W x 25.2W x 33.4H in
|
| Instrument Panel |
Panel to have quick disconnects and be capable of being remotely mounted with use of factory supplied harness. Panel to include engine start/stop function, hour meter, air compressor on/off switch, air pressure gauge, 2 air discharge ports, hydraulic on/off switch, generator on/off switch, thermal breakers, 120V GFCI and 240V recepticles, weld cable connections, weld mode selector switch, digital display for amperage and voltage output, potentiometer for adjustment of amerage and voltage for weld mode, battery boost mode selector switch, battery booster cable connection, mode indicator lights and system fault lights. |
| Drive System |
Heavy duty belt-drive system. Belt to drive the generators to be poly-V serpentine belt with quiet channel technology and automatic tensioner. Belt for compressor to be poly-V serpentine belt with quiet channel technology and tensioner. |
| Metal and Tanks |
Fully powder-coated with galvanneal sheet metal, ¼" plate steel main frame, integrated lift hook and full service access. |
