| Welder |
High frequency DC/CC welding, 270AMP at 100% duty cycle. CC: 40-300 AMP operating range, CV: 15-30V |
| Generator |
Totally brushless with capacitor, copper windings, bi-directional rotation, <6% distortion. Capacity 7 kW peak, 6.8 kW continuous, AC power, 60 Hz, single phase, 120V and 240V outlets |
| Compressor |
Vanair® encapsulated 40 CFM rotary screw air compressor system with clutch to eliminate horsepower consumption during unloaded condition. 40 CFM free air at up to 175 PSIG |
| Battery |
12V sealed lead acid - per DOT specification 49 CFR 173.159 |
| Boost/Charger |
300 AMP 12/24V battery boost, 50 AMP 12V charge |
| Engine |
Electric start diesel engine, Kuobta® model DH902, liquid cooled, 25 HP tier 4 final with high temperature and low oil pressure shut down |
| Fuel Capacity |
12 gallon integral tank or plumb to the chassis |
| Air Storage Tank |
4 gallon integrated |
| Air Intake Filters |
Separated two-stage, heavy duty, dry-type air filters with dust evacuators shall be provided for air compressor |
| Air/Fluid Separator |
Separator to be externally mounted spin-on design. Vanair separator shall provide for enhanced air quality, reduced operating and maintenance cost and optimized compressor performance |
| Protective Circuit |
Compressor to automatically shutdown in case of high compressor temperature or over pressurization. Additional protective features provided include automatic blow down valve, receiver relief valve and minimum pressure valve. |
| Cooling System |
Compressor cooling system shall allow rated air delivery and pressure operation continuously in 110ºF ambient temperatures. Cooler to be mounted in a powder coated galvanneal sheet metal enclosure with a suction type fan assembly. Compressor fluid shall be filtered by a 25 micron full flow spin-on replaceable filter canister. A fan temperature switch is included to regulate compressor cooling. An additional fan temperature switch is included to regulate enclosure cooling. |
| Inlet Controls |
Electric inlet control valve shall be integrated into compressor system and automatically modulate output from 0 to 100% in response to air demand |
| Weight - Dry |
870 lbs |
| Dimensions |
Platform - 47.5L x 21.0W x 33.4H in.
|
| Instrument Panel |
Panel to have quick disconnects and be capable of being remotely mounted. Panel to include engine start/stop function, digital fuel gauge and hour meter, air compressor on/off switch, air pressure gauge, generator on/off switch, thermal breakers, 120V and 240V receptacles, weld cable connections, weld mode selector switch, digital display for amperage and voltage output, potentiometer for adjustment and amperage and voltage for weld mode, a battery boost mode selector switch, battery booster cable connection, mode indicator lights and system fault lights. |
| Drive System |
Heavy duty belt-drive system. Belt to drive the generators to be poly-V serpentine belt with quiet channel technology and automatic tensioner. Belt for compressor to be poly-V serpentine belt with quiet channel technology and tensioner. |
| Metal and Tanks |
Fully powder-coated with galvanneal sheet metal, ¼" plate steel main frame, integrated lift hook and full service access. |
