GPD-45 Multi-Pro XA Gas Powered Post Driver
*Shipping: 59 pounds 33" X 15" X 18"
The XA model was designed at the request of sign installers, municipalities and rental houses. The XA Model is the Multi-Pro with the extended anvil andlonger Chuck-Lok already installed. This makes it truly a four (4) bolt change to switch to channel post, square tube and back to round. The XA will weigh in only 7lbs heavier than tthe standard Multi-Pro and is primarily designed for higher productiving and U-Channel sign installers.
Rhino has an ergonomically deisgned the handles for eight distribution and incorporated internal vibration dampening for the operator's comfort. Though the driver is economically priced, the GPD-45 Multi-Pro XA components are engineered to the highest standards. The design of the Rhino GPD-45 Multi-Pro XA includes Rhino Chuck-Lok adaptor technology. This innovative post adaptor system increses driving efficiency by aligning post to optimum striking position, prolongs tool life, and provides flexibility to quickly adapt to different post sizes in the field. When ordering specify the adaptors you need.
The driver is manufactured in the USA from the very best materials to promote long tool life, including heat-treated alloy steel, "aircraft quality" aluminum, stainless steel fasteners and sealed bearing on all rotating parts.
Shipped with 2", 1-3/4" and 1" chuck sleeve, allowing you to quickly switch between many post types.
Covered under Rhino's Limited LIfetime Warranty
*** Free ground shipping within Continental United States ***
TECHNICAL SPECIFICATIONS
| Overall Dimensions (H x W x D) | in | 26 x 10-3/4 x 17 |
| Weight | lbs | 51 |
| Power | | Honda GX35 4-stroke engine |
| Performance | bpm | 1720 |
| Fuel | | Regular Unleaded Gasoline |
| Engine Oil | | SAE 10W-30 |
| Grease | | Rhino SynLube |
APPLICATIONS
| Type or Size of Post to be Driven | Accessor/Adaptor Required |
| Fiberglass T-Post | 2" adaptor |
| T-Post | 2" adaptor |
| 5/8" or 3/4" Ground Rod | 1" adaptor |
| Tent Stake | Tent Stake Chuck |
| Concrete Form Pin | Form Pin Chuck |
| 1" to 1-7/8" Post | 2" adaptor |
| 2" - 2-3/8" Post | Standard Chuck |
| 1-1/2" to 2-1/2" Square Post and Square Post Sign Anchor | Chuck and Drive Cap |
| 1.2 - 4lb Channel Post and Channel Post Sign Anchor | Channel Chuck |
MULTI-PRO KITS
| Multi-Pro Muncipality Drive Kit | 301185 |
| Included in Kit: | |
| - Short chuck Tube (must have with any Aquare Anchor Drive Caps) | 301171 |
| - 2" Square Anchor Drive Cap - for 1-3/4" ID Posts | 300933 |
| - 2-1/4" Squre Anchor Drive Cap - for 2" ID Posts | 300934 |
| - 2-1/2" Square Anchor Drive Cap - for 2-1/4" ID Posts | 300935 |
| - Channel Post Chuck | 301159 |
| - Channel Post Anvil | 301169 |
| | |
Multi-Pro U-Channel Drive Kit 1.2-4lb Channle Post and Channel Post Sign Anchor | 301175 |
| Included in Kit: | |
| - Channel Chuck | 301159 |
| - Channel Post Anvil | 301169 |
| | |
ACCESSORIES AND REPLACEABLE PARTS
| Rhino Formula Grease - 10 hr grease | 300500 |
DOCUMENTATION
