Full kit ready to go. Transport your driver, chuck, and accessories. Choice of 4 chuck adaptors.
Includes
| PD-55 Medium Duty Post Driver with 37/8" Master Chuck | 1 | 70013 |
| - 2" ID Chuck Adaptor* | | 70612 |
| - 2½" ID Chuck Adaptor* | | 70611 |
| - 3" ID Chuck Adaptor* | | 70610 |
| - 3½" ID Chuck Adaptor* | | 70609 |
| - Channel Post Chuck Adaptor - 2.0 to 2.75 lbs/ft Posts* | | 70618 |
| Throttle Valve Kit, include 5' Hose Whip | 1 | 600000 |
| Filter-Regulator-Lubricator and Carrier | 1 | 225005 |
| 15' 2" Hose Whip | 1 | 71199 |
| Non-Detergent Oil - 1 quart | 1 | |
| Service & Operating Instructions | | |
* Choice of chuck adaptors is customizable.
** FREE SHIPPING within the Continental United States
SPECIFICATIONS
| TOP COVER | Ductile iron casting, high in strength and ductility has a 1" (25.4 mm) diameter handle designed into the cover for easy handling and carrying. O-Ring sealed. |
| BODY | Ductile iron casting, with excellent wear resistant characteristics. The air inlet is cast into the body and tapped with 3/4" NPT female threaded ports, along with 1" (25.4 mm) diameter ergonomically designed side handles for easy handling and carrying. Chuck bolts pass thru the lower body flange into tapped holes in the chuck mounting plate allowing special chucks to be made in a wide variety of shapes and sizes. |
| PISTON | Alloy steel heat treated with a ground surface with hard chrome plate. Designed with 2 round valve ports to give better lubrication and load distribution to the valve ring while running. |
| MASTER CHUCK & CHUCK ADAPTORS | The 3 7/8" (98.4 mm) I.D. master chuck is of an all welded, reinforced steel and tubing construction. The chuck is equipped with extra long chuck adaptor attachment lugs. Standard chuck adaptors are available in the following sizes: 1" (25.4 mm) I.D., 1 1/2" (38.1 mm) I.D., 2" (50.8 mm) I.D., 2 1/2" ( 63.5 mm) I.D., 3" (76.2 mm) I.D., 3 1/2" (88.9 mm) I.D. and three channel post chuck adaptors for 1.2 to 1.5 lbs/ft, 2 to 2.75 lbs/ft and 3 to 4 lbs/ft posts. |
| FASTENERS | S.A.E.Grade 5 bolts with belleville lock washers. All fasteners are plated. |
| AIR CONSUMPTION | 42 CFM (1.19 m3/min) @ 90 PSI (6.4 kg/cm2) |
| WEIGHT | 55 lbs. |
| HEIGHT | 21" |
Adapters & Accessories
| 3½" ID Chuck Adapter | 70609 | 4"x4" Wood Post Chuck | 70590 | Transport Cart | 71201 |
| 3" ID Chuck Adapter | 70610 | PD55 Chuck Adapter for Channel PostBreak-Away Anchor System | 70832 | Hose Assy - ¾" and up to 25' Hose-includes assembly, labor and all parts EXCEPT hose. | 607000 |
| 2½" ID Chuck Adapter | 70611 | Drive Cap for the Channel Post Break-Away Anchor System | 70836 | ¾" Hose - price per foot | 605006 |
| 2" ID Chuck Adapter | 70612 | PD55 Chuck Adapter for Square Tube Break-Away Anchor System | 71014 | Air Hose Assembly - 100' x ¾" | 100048 |
| 1½" ID Chuck Adapter | 70613 | 1¼" Low Drive Extension Drive Cap for Square Break-Away Bases 1" Pin | 71004 | Throttle Valve Kit with 5' Hose Whip | 600000 |
| 1" ID Chuck Adapter | 70614 | 1½" Low Drive Extension Drive Cap for Square Break-Away Bases 1¼" Pin | 71005 | Filter-Regulator-Lubricator | 601128 |
| Channel Post Chuck Adapter - 1.2-1.5 lbs/ft Post | 70617 | 1¾" Low Drive Extension Drive Cap for Square Break-Away Bases 1½" Pin | 71006 | Carrier for Filter-Regulator-Lubricator | 225001 |
| Channel Post Chuck Adapter - 2.0-2.75 lbs/ft Posts | 70618 | 2" Low Drive Extension Drive Cap for Square Break-Away Bases 1¾" Pin | 71007 | | |
| Channel Post Chuck Adapter - 3.0-4.0 lbs/ft Posts | 70619 | 2¼" Low Drive Extension Drive Cap for Square Break-Away Bases 2" Pin | 71008 | | |
| 2" PD55 Heavy Chuck Adapter | 70615 | 2½" Low Driver Exension Drive Cap for Square Break-Away Bases 2¼" Pin | 71009 | | |
| | | 2" Drive Cap for Schedule 40 Pipe with T-Bar & Clip | 71260 | | |
| | | 2½" Drive Cap for Schedule 40 Pipe with T-Bar & Clip | 71261 | | |
| | | 3" Drive Cap for Schedule 40 Pipe with T-Bar & Clip | 71262 | | |
DOCUMENTATION
