PD-200 Heavy Duty Post Driver 7" Round

$4,197.00

Weight: 182 lbs

Add to Cart:

The PD-200 Heavy Duty Post Pounder is the perfect choice for driving Beams, Round, Square or Rectangular Tubing, Wood Posts, Stakes or any shape up to 12 ".

SHIPPING

$150 Flat Rate LTL/Truck Shipping to Commercial destinations*
$250 flat rate for Residential destinations in Continental US. Rates will be quoted for Alaska, Hawaii and all international destinations.

SPECIFICATIONS

TOP COVER	Ductile iron casting, high in strength and ductility has 1" (25.4 mm) diameter handles with chain loop designed into the cover for easy handling and carrying. O-Ring sealed.
BODY	Ductile iron casting, with excellent wear resistant characteristics. The air inlet is cast into the body and tapped with 3/4" NPT female threaded ports, along with 1" (25.4 mm) diameter side handles for easy handling. Chuck bolts pass thru the lower body flange into tapped holes in the chuck mounting plate allowing special chucks to be made in a wide variety of shapes and sizes.
PISTON	Alloy steel heat treated with a ground surface with hard chrome plate. Designed with 2 round valve ports to give better lubrication and load distribution to the valve ring while running.
MASTER CHUCK AND CHUCK ADAPTORS	The 5 1/2" (139.7 mm) and 7" (177.8 mm) I.D. master chucks are of an all welded, reinforced steel and tubing construction. The chuck is equipped with extra long chuck adaptor attachment lugs. Standard chuck adaptors are available in a variety of sizes. See below.
FASTENERS	S.A.E.Grade 8 bolts with belleville lock washers. All fasteners are plated.
AIR CONSUMPTION	72 CFM (2.04 m3/min) @ 100 PSI (7 kg/cm2)
HEIGHT	27"
WEIGHT	205 lbs

ACCESSORIES AND ADAPTORS

ACCESSORIES		POST DRIVER CHUCKS
Throttle Valve Kit with 5' 2" Hose Whip	600000	5½" Master Chuck Assembly	70746
Filter Regulator Lubricator	601128	7" Master Chuck Assembly	70758
Carrier for Filter Regulator Lubricator	225001	5" Chuck Adaptor for 7" Master Chuck	70837
Filter Regulator Lubricator & Carrier - pre-assembled	225005	4" x 6" PD 200 Master Chuck (Chuck size 5⁷/₈" x 7⁵/₈") for the H-Column Guardrail Post System	70061
Pile Driving Storage Box	71401	4" x 6" Drive Cap for the H-Column Guardrail Post System	70062
MISCELLANEOUS ACCESSORIES		6" x 6" PD-200 Square Master Chuck	70761
Hose Assembly - ¾" and up to 25' Hose. Includes assembly, labor and all parts EXECPT hose. Add 605006 per foot for length of hose needed	607000	PD-200 Slotted Sheet Pile Master Chuck (.31 & x50 slots)	70597
¾" Extra Hose - price per foot	605006	Custom Master Chuck Assembly	70762
Air Hose Assembly - 100' x ¾"	100048

ACCESSORIES FOR 5½" MASTER CHUCK		ACCESSORIES FOR 7" MASTER CHUCK
2" Drive Cap for Sched 40 Pipe with T-Bar and Clip	71260	2" Drive Cap for Sched 40 Pipe with T-Bar and Clip	71260
2½" Drive Cap for Sched 40 Pipe with T-Bar and Clip	71261	2½" Drive Cap for Sched 40 PIpe with T-Bar and Clip	71261
3" Drive Cap for Sched 40 PIpe with T-Bar and Clip	71262	3" Drive Cap for Sched 40 Pipe with T-Bar and Clip	71262
3½" Drive Cap for Sched 40 Pipe with T-Bar and Clip	71263	3½" Drive Cap for Sched 40 PIpe with T-Bar and Clip	71263
4" Drive Cap for Sched 40 Pipe with T-Bar and Clip	71264	4" Drive Cap for Sched 40 PIpe with Slammer Hammer	71264
PD-200 Chuck Adaptor for the 3" Heavy Square Tube Break-Away Anchor Systems	71034	5" Drive Cap for Sched 40 Pipe with Slammer Hammer	71295
PD-200 Chuck Adaptor for the Channel Post Break-Away Anchor System	71039	6" Drive Cap for Sched 40 Pipe with Slammer Hammer	71306
Drive Cap for the Channel Post Break-Away Anchor System	70836
PD-200 Chuck Adaptor for the Square Tube Break-Away Anchor System	71043
1¼" Drive Cap for the Square Tube Break-Away Anchor System	71004
1½" Drive Cap for the Square Tube Break-Away Anchor System	71005
1¾ Drive Cap for the Square Tube Break-Away Anchor System	71006
2" Drive Cap for the Square Tube Break-Away Anchor System	71007
2¼" Drive Cap for the Square Tube Break-Away Anchor System	71008
2½" Drive Cap for the Square Tube Break-Away Anchor System	71009