The PD-140 is a power performer. Often referred to as the guard rail driver, the PD-140 is fully capable of driving posts that competitive systems simply cannot. No other system strikes the balance between investment and return as does the PD-140. Thanks to the 4" piston and 139 lb. ductile iron casting body, the PD-140 is ideally suited to drive guard rail posts, heavy line posts, corner posts, gate posts, baseball backstops, dock piles, pin piles, foundation piles, wood posts, concrete posts, heavy gauge aluminum posts, well points, well casing and fence posts from 2" to 4" in diameter.
SHIPPING
- $150 Flat Rate LTL/Truck Shipping to Commercial destinations*
- $250 flat rate for Residential destinations in Continental US. Rates will be quoted for Alaska, Hawaii and all international destinations.
SPECIFICATIONS
| TOP COVER |
Ductile iron casting, high in strength and ductility has 1" (25.4 mm) diameter handles with chain loop designed into the cover for easy handling and carrying. O-Ring sealed. |
| BODY |
Ductile iron casting, with excellent wear resistant characteristics. The air inlet is cast into the body and tapped with 3/4" NPT female threaded ports, along with 1" (25.4 mm) diameter side handles for easy handling. Chuck bolts pass thru the lower body flange into tapped holes in the chuck mounting plate allowing special chucks to be made in a wide variety of shapes and sizes. |
| PISTON |
Alloy steel heat treated with a ground surface with hard chrome plate. Designed with 2 round valve ports to give better lubrication and load distribution to the valve ring while running. |
| MASTER CHUCK AND CHUCK ADAPTORS |
The 4 1/4" (107.9 mm) I.D. master chuck is of an all welded, reinforced steel and tubing construction. The chuck is equipped with extra long chuck adaptor attachment lugs. Standard chuck adaptors are available in the following sizes: 2 1/2" ( 63.5 mm) I.D., 3" (76.2 mm) I.D., 3 5/8" (92 mm) I.D. and three channel post chuck adaptors for 1.2 to 1.5 lbs/ft, 2 to 2.75 lbs/ft and 3 to 4 lbs/ft posts. A chuck is available to drive 4" x 4" (101 mm x 101 mm) wood posts and a chuck and drive cap are available to drive 4" x 6" (101 mm x 152 mm) H column guard rail posts. |
| FASTENERS |
S.A.E.Grade 5 bolts with belleville lock washers. All fasteners are plated. |
| AIR CONSUMPTION |
64 CFM (1.81 m3/min) @ 100 PSI (7 kg/cm2) |
| WEIGHT |
139 lbs. |
| HEIGHT |
25.75" |
ACCESSORIES AND ADAPTERS
| Throttle Valve Kit with 5' Hose Whip |
600000 |
|
CHUCK ADAPTORS |
| Filter Regulator Lubricator |
601128 |
|
35/8" ID Chuck Adaptor |
70634 |
| Carrier for Filter Regulator Lubricator |
225001 |
|
3" ID Chuck Adaptor |
70635 |
| Filter Regulator Lubricator and Carrier - Pre-Assembled |
225005 |
|
2½" ID Chuck Adaptor |
70636 |
| |
|
|
2" ID Chuck Adaptor |
70637 |
| POST DRIVER MASTER CHUCKS |
|
|
|
| PD-140 4¼" ID Master Chuck Assy |
70644 |
|
CHANNEL POST CHUCK ADAPTORS |
| 4" x 4" Wood Post Chuck (Chuck size 41/16" x 41/16" ) |
70063 |
|
1.2 - 1.5 lbs/ft Posts |
70640 |
| 4" x 6" H Column Chuck (Chuck size 57/8" x 75/8") |
70062 |
|
2.0 - 2.75 lbs/ft Posts |
70641 |
| PD-140 Slotted Sheet Pile Master Chuck |
70597 |
|
3.0 - 4.0 lbs/ft Posts |
70642 |
| Custom Master Chuck Assy |
70762 |
|
|
|
| |
|
|
|
|
| MISCELLANEOUS ACCESSORIES |
| Transport Cart |
71203 |
|
PD-140 Chuck Adaptor for Square Low Drive Extensions |
71015 |
| Hose Assembly - ¾" Hose up to 25'. Includes assembly, labor, and all parts EXCEPT hose. Add 605006 per foot of hose needed |
607000 |
|
1¼" Low Drive Extension Drive Cap for Square Break-Away Bases 1" Pin |
71004 |
| Extra ¾" Hose - price per foot |
605006 |
|
1½" Low Drive Extension Drive Cap for Square Break-Away Bases 1¼" Pin |
71005 |
| Air Hose Assembly - 100' x ¾" |
100048 |
|
1¾" Low Drive Extension Drive Cap for Square Break-Away Bases 1½" Pin |
71006 |
| 4" x 6" H Colum Driving Cap (chuck size 4¼" x 6¼") |
70062 |
|
2" Low Drive Extension Drive Cap for Square Break-Away Bases 1¾" Pin |
71007 |
| |
|
|
2¼" Low Drive Extension Drive Cap for Square Break-Away Bases 2" Pin |
71008 |
| 2" Drive Cap for Sched 40 Pipe with T-Bar and Clip |
71260 |
|
2½" Low Drive Extension Drive Cap for Square Break-Away Bases 2¼" Pin |
71006 |
| 2½" Drive Cap for Sched 40 Pipe with T-Bar and Clip |
71261 |
|
|
|
| 3" Drive Cap for Sched 40 Pipe with T-Bar and Clip |
71262 |
|
|
|
| 3½" Drive Cap for Sched 40 Pipe with Slammer Hammer |
71263 |
|
|
|
KIT PACKAGES
|
PD-140 Ecomony Kit
- 70015 - PD-140 Heavy Duty Post Driver with 4¼" Master Chuck
- Choice of ONE Chuck Adaptor
- 600000 - Throttle Valve Kit with 5' Hose Whip
- 601128 - Filter Regulator Lubriator
- 225001 - Carrier for Filter Regulator Lubricator
- 71199 - 15'2" Hose Whip
- 1 Gallon Rock Drill Oil
- Safety and Operating Instructions
|
71275 |
|
PD-140 Utility Kit
- 70015 - PD-140 Heavy Duty Post Driver with 4¼" Master Chuck
- Choice of ONE Chuck Adaptor
- 600000 - Throttle Valve Kit with 5' Hose Whip
- 601128 - Filter Regulator Lubricator
- 225001 - Carrier for Filter Regulator Lubricator
- 71199 - 15'2" Hose Whip
- 71012 - MP-3 Manual Post Puller
- 1 Qt Non-Detergent Oil
- Safety abd Operating Instructions
|
71279 |
|
PDT-140 Transport Kit
- 70015 - PD-140 Heavy Duty Post Driver with 4¼" Master Chuck
- 71203 - Transport Cart
- 70636 - 2½" Chuck Adaptor*
- 70642 - 3-4 lbs/ft Channel Post Chuck Adaptor*
- 600000 - Throttle Valve with 5' Hose Whip
- 601128 - Filter Regulator Lubricator
- 71199 - 15'2" Hose Whip
- 1 Qt Non-Detergent Oil
- Safety and Operating Instructions
* Chuck adaptor selection is customizable
|
71218 |
|
PDT-140 Total Solution Kit
- 70015 - PD-140 Heavy Duty Post Driver with 4¼" Master Chuck
- 71203 - Transport Cart
- 70636 - 2½" Chuck Adaptor*
- 70642 - 3-4 lbs/ft Channel Post Chuck Adaptor*
- 600000 - Throttle Valve with 5' Hose Whip
- 601128 - Filter Regulator Lubricator
- 71199 - 15'2" Hose Whip
- 71013 - MP-3 Manual Post Puller
- 220422 - MP-3 Chain Assembly
- 71040 - Post Grabber
- 1 Qt Non-Detergent Oil
- Safety and Operating Instructions
|
71271 |
|
PD-140 Fence Post Kit
Same as Economy Kit with 70635 PD-140 3" ID Chuck Adaptor
|
71345 |
|
|
|
DOCUMENTATION
