The legendary PD-55
For nearly 40 years, the PD-55 and its predecessor - the PD-50 have been the productivity leaders in post driving. At just 54 pounds and with a 3½" piston, the brutally tough PD-55 is capable of hankling your toughest applications quickly and efficiently. The PD-55 is ideally suited for driving T-posts, ground rods, tent stakes, grape stakes, delineator posts, form pins and fence posts up to 35/8".
** FREE SHIPPING within the Continental United States
SPECIFICATIONS
| TOP COVER | Ductile iron casting, high in strength and ductility has a 1" (25.4 mm) diameter handle designed into the cover for easy handling and carrying. O-Ring sealed. |
| BODY | Ductile iron casting, with excellent wear resistant characteristics. The air inlet is cast into the body and tapped with 3/4" NPT female threaded ports, along with 1" (25.4 mm) diameter ergonomically designed side handles for easy handling and carrying. Chuck bolts pass thru the lower body flange into tapped holes in the chuck mounting plate allowing special chucks to be made in a wide variety of shapes and sizes. |
| PISTON | Alloy steel heat treated with a ground surface with hard chrome plate. Designed with 2 round valve ports to give better lubrication and load distribution to the valve ring while running. |
| MASTER CHUCK & CHUCK ADAPTORS | The 3 7/8" (98.4 mm) I.D. master chuck is of an all welded, reinforced steel and tubing construction. The chuck is equipped with extra long chuck adaptor attachment lugs. Standard chuck adaptors are available in the following sizes: 1" (25.4 mm) I.D., 1 1/2" (38.1 mm) I.D., 2" (50.8 mm) I.D., 2 1/2" ( 63.5 mm) I.D., 3" (76.2 mm) I.D., 3 1/2" (88.9 mm) I.D. and three channel post chuck adaptors for 1.2 to 1.5 lbs/ft, 2 to 2.75 lbs/ft and 3 to 4 lbs/ft posts. |
| FASTENERS | S.A.E.Grade 5 bolts with belleville lock washers. All fasteners are plated. |
| AIR CONSUMPTION | 42 CFM (1.19 m3/min) @ 90 PSI (6.4 kg/cm2) |
| WEIGHT | 55 lbs. |
| HEIGHT | 21" |
ACCESSORIES AND ADAPTORS
| Throttle Valve Kit with 5' Hose Whip | 600000 | | 3½" ID Chuck Adaptor | 70609 |
| Filter-Regulator-Lubricator and Carrier pre-assembled | 225005 | | 3" ID Chuck Adaptor | 70610 |
- Filter-Regulator-Lubricator For operator safety and post driver protections | 601128 | | 2½" ID Chuck Adaptor | 70611 |
| - Carrier for Filter-Regulator-Lubricator | 225001 | | 2" ID Chuck Adaptor | 70612 |
| CHUCKS | | | 1½" ID Chuck Adaptor | 70613 |
| PD-55 37/8" ID Master Chuck | 70592 | | 1" ID Chuck Adaptor | 70614 |
| PD-55 4¼" Round Master Chuck | 70060 | | 2" PD-55 Heavy Chuck Adaptor | 70615 |
4" x 4" Wood Post Chuck (Chuck size 41/16" x 41/16") | 70590 | | CHANNEL POST CHUCK ADAPTOR Click here for inside dimensions | |
| Custom Master Chuck Assembly | 70762 | | 1.2 - 1.5 lbs/ft Posts | 70617 |
| MISCELLANEOUS | | | 2.0 - 2.75 lbs/ft Posts | 70618 |
| Transport Cart | 71201 | | 3.0 - 4.0 lbs/ft Posts | 70619 |
| Hose Assembly - ¾" and up to 25' Hose. Includes assembly, labor and all parts EXCEPT hose. Order ¾" Extra Hose per foot 605006 | 607000 | | BREAK-AWAY SYSTEMS | |
| ¾" Extra Hose - price per foot | 605006 | | PD-55 Chuck Adator for Channel POst Break-Away Anchor System | 70832 |
| Air Hose Assembly - 100' x ¾" | 100048 | | Driver Cap for the Channel Post Break-Away Anchor System | 70836 |
| | | | PD-55 Chuck Adator for Square Tube Break-Away Anchor System | 71014 |
| DRIVE CAPS | | | 1¼" Low Drive Extension Drive Cap for Square Break-Away Bases 1" Pin | 71004 |
| 2" Drive Cap for Schedule 40 Pipe with T-Bar and Clip | 71260 | | 1½" Low Drive Extension Drive Cap for Square Break-Away Bases 1¼" Pin | 71005 |
| 2½" Drive Cap for Schredule 40 Pipe with T-Bar and Clip | 71261 | | 1¾" Low Drive Extension Drive Cap for Square Break-Away Bases 1½" Pin | 71006 |
| 3" Drive Cap for Schedule 40 Pipe with T-Bar and Clip | 71262 | | 2" Low Drive Extension Drive Cap for Square Break-Away Bases 1¾" Pin | 71007 |
| | | | 2¼" Low Drive Extension Drive Cap for Squiare Break-Away Bases 2" Pin | 71008 |
| | | | 2½" Low Drive Extension Drive Cap for Square Break-Away Bases 2¼" Pin | 71009 |
KIT PACKAGES
| Economy Kit | Simply the basics - this kit is designed to provide the simple requirements to being post driving. Includes: - 70013 - PD-55 Medium Duty Post Driver with 37/8" Master Chuck
- Choice of ONE Chuck Adaptor
- 600000 - Throttle Valve Kit, includes 5' Hose Whip
- 601128 - Filter-Regulator-Lubricator
- 225001 - Carrier for Filter Regulator Lubricator
- 71199 - 15' 2" Hose Whip
- Service & Operating Instructions
| 71273 |
| Utility Kit | Designed to outfit a utility vehicle with the essential elements to allow crews to quickly and efficiently disembark a vehicle and perform required tasks quickly and efficiently. Includes: - 70013 - PD-55 Medium Duty Post Driver with 37/8" Master Chuck
- Choice of ONE Chuck Adaptor
- 600000 - Throttle Valve Kit, includes 5' Hose Whip
- 601128 - Filter-Regulator-Lubricator
- 225001 - Carrier for Filter Regulator Lubricator
- 71012 - MP-3 Manual Post Puller
- Service & Operating Instructions
| 71277 |
| Fence Post Kit | Contains the basics needed to bhegin driving in round fence post under 2.5" diamer. Includes - 70013 - PD-55 Medium Duty Post Driver with 37/8" Master Chuck
- 70611 - PD-55 2.5" ID Chuck Adaptor
- 600000 - Throttle Valve Kit, includes 5' Hose Whip
- 601128 - Filter-Regulator-Lubricator
- 225001 - Carrier for Filter Regulator Lubricator
- 71199 - 15' 2" Hose Whip
- Service & Operating Instructions
| 71341 |
| PD-55 Square Post Driver Kit | The basic pieces needed to begin driving in break-away, square tube. Includes: - 70013 - PD-55 Medium Duty Post Driver with 37/8" Master Chuck
- 71014- PD-55 Chuck Adator for Square Tube Break-Away Anchor System
- 71004 - 2" Drive Cap for the Square Tube Break-Away System
- 600000 - Throttle Valve Kit, includes 5' Hose Whip
- 601128 - Filter-Regulator-Lubricator
- 225001 - Carrier for Filter Regulator Lubricator
- 71199 - 15' 2" Hose Whip
- Service & Operating Instructions
| 71342 |
| PD-55 Channel Post Driver Kit | The basic pieces needed to begin driving in channel post. Includes: - 70013 - PD-55 Medium Duty Post Driver with 37/8" Master Chuck
- 71014 - PD-55 Channel Post Adaptor
- 70836 - Drive Cap for the Channel Post Break-Away Anchor System
- 600000 - Throttle Valve Kit, includes 5' Hose Whip
- 601128 - Filter-Regulator-Lubricator
- 225001 - Carrier for Filter Regulator Lubricator
- 71199 - 15' 2" Hose Whip
- Service & Operating Instructions
| 71343 |
| Transport Kit | Full kit ready to go - transport your driver, chuck and accessories. Includes: - 70013 - PD-55 Medium Duty Post Driver with 37/8" Master Chuck
- 70610 - 3" Chuck Adaptor*
- 70611 - 2½" Chuck Adaptor*
- 70612 - 2" Chuck Adaptor*
- 70618 - 2 to 2¾ lbs/ft Channel Post Adaptor*
- 600000 - Throttle Valve Kit, includes 5' Hose Whip
- 601128 - Filter-Regulator-Lubricator
- 71199 - 15' 2" Hose Whip
- Service & Operating Instructions
* Chuck Adaptor options are customizable. | 71216 |
| Total Solution | Full purpose transportable kit - ready to tackle any job quickly. Includes - 70013 - PD-55 Medium Duty Post Driver with 37/8" Master Chuck
- 70610 - 3" Chuck Adaptor*
- 70611 - 2½" Chuck Adaptor*
- 70612 - 2" Chuck Adaptor*
- 70618 - 2 to 2¾ lbs/ft Channel Post Adaptor*
- 600000 - Throttle Valve Kit, includes 5' Hose Whip
- 601128 - Filter-Regulator-Lubricator
- 71199 - 15' 2" Hose Whip
- 71013 - MP-3 Manual Post Puller
- 220422 - MP-3 Chain Assembly
- 71040 - Post Grabber
- Service & Operating Instructions
* Chuck Adaptor options are customizable. | 71269 |
| PD-55 Postmaster® Driver for Postmaster® and Plus® Posts | For professional fense installers using the Master Halco® Postmaster and Postmaster Plus® Fence Systems,and similar types of post systems. Includes: - 70019 - PD-55 Postmster Post Driver
- 70589 - PD-55 Postmaster Chuck, Slotted Chuck
- 70677 - POstmaster Adapter for PD-55 (will only work with 70589 Hardware)
| 70019 |
DOCUMENTATION
