Atlas Copco Rock Drills, Breakers & Handheld Air Tools
Crowder Supply stocks the Atlas Copco handheld construction range across all four power sources: TEX and RTEX pneumatic paving breakers and jackhammers, BBD and SRD pneumatic rock drills, the gas-powered Cobra family, hydraulic LH breakers with LP power packs, LPD post drivers, pick hammers, rivet busters, pumps, and light towers — with drill steel, points and chisels, oils, and parts on the same shelf.
The short version
Run compressor air? Pick a TEX or RTEX breaker or a BBD/SRD rock drill. No compressor on site? The gas Cobra PROe breaks and the Cobra Combi breaks and drills, anywhere you can carry 53 lb. Need quiet, low-vibration power for one operator? A hydraulic LH breaker on an LP power pack. Driving posts, call it an LPD. Not sure? Call 1-888-883-5144 and we will size it to your job.
Cobra Gas Breakers & Drills — No Compressor, No Cords
One person, one 53-lb machine, one gallon of gas. The Cobra family is the fastest way to break or drill where a compressor cannot go — remote right-of-way, track work, landscape rock, emergency response.
Cobra PROe Gas Paving Breaker
44 ft-lb at the tool tip — real 90-lb-class breaking from a machine one worker carries in a truck bed. Silica rock and reinforced concrete are in its lane; alkylate fuel keeps exhaust manageable.
Choose it when: you break concrete, asphalt, or rock away from a compressor — utility cuts, rural fence rock, trail work, rail right-of-way.
Key specs
Cobra Combi Gas Breaker/Drill
The all-in-one: flip the switching mechanism and it goes from breaking to rotary drilling in seconds — 8–12 in. per minute in solid granite, holes to 6.5 ft deep. Our best-selling gas machine and the classic one-man post-hole and blast-hole answer.
Choose it when: the same crew breaks and drills — anchor holes, plug-and-feather splitting, fence posts in ledge, blasting pilot holes.
Key specs
Cobra TT Gas Tie Tamper
The railway version: 30 ft-lb at 1,620 BPM tuned to pack ballast under ties without pulverizing it. Same carry-anywhere gas platform, no compressor truck on the ballast.
Choose it when: you tamp ties, maintain short line or industrial track, or spot-tamp after tie replacement.
Key specs
TEX & RTEX Pneumatic Paving Breakers & Jackhammers
Nine air-powered breakers from 37.5 to 95 lb. The TEX line is the classic jackhammer, most models vibro-reduced; RTEX is the efficiency play — heavy-class breaking on roughly half the air.
RTEX Pneumatic Breakers
Constant-pressure chamber technology: the 37.5-lb RTEX 15 breaks like a machine 20 lb heavier on just 32.6 CFM — less than half the air a conventional 60-lb-class breaker drinks. Small towable compressors suddenly run big-breaker jobs.
Choose it when: compressor capacity is tight, crews carry breakers all day, or vibration exposure hours are the limit.
Key specs
TEX Pneumatic Breakers
The jobsite-standard air jackhammer, 42 to 95 lb. The PE models carry the vibro-reduced H.A.P.S. handle — up to seven times the trigger time of a fixed-handle breaker — and the heavy TEX 40/60/90 class handles mainline pavement, bridge deck, and rock.
Choose it when: you want the proven pneumatic breaker in the exact weight class your work calls for, 30-lb sidewalk to 90-lb demolition.
Key specs
Pneumatic Rock Drills — Surface & Underground
Hand-held air drills for every hole: plugging and horizontal work, vertical sinking, and underground jackleg drilling with water flushing. All take standard hex-shank steel we stock alongside them.
BBD Hand-Held Rock Drills
The light classics: 22–27 lb BBD 12 for horizontal and plug-hole drilling in concrete and stone; 34-lb BBD 15 for vertical holes at 2,520 BPM on 47 CFM. Monument work, plug and feather, anchor pilots.
Choose it when: holes are under ~1-1/2 in. and portability beats raw penetration rate.
Key specs
SRD 25E Sinker Drill
The 60-lb vertical production drill: 106 CFM feeding 2,040 BPM with 215 RPM rotation. Quarry sinking, foundation holes, blast rounds — the drill you stand behind all shift.
Choose it when: you sink vertical holes in rock day in, day out, and penetration rate pays the bills.
Key specs
BBC 16W Jackleg-Class Rock Drill
The 63-lb underground production drill with built-in water flushing — 2,340 BPM from a 70mm piston for 27–41mm holes. Pairs with BMT 51 and ALF-series pusher legs for horizontal heading work.
Choose it when: you drill underground or need wet flushing for silica control on production holes.
Key specs
Also in the range: the DKR36 drill/chipping hammer combo ($1,199), the RH 572E, and jackleg & stoper drills. Need a pusher leg for your BBC — BMT 51 or ALF series — or a jackleg package? Call 1-888-883-5144 and we will quote it; we also stock the American-made BTE Mid-Western S83 jackleg.
Hydraulic Tools — LH Breakers, LP Power Packs & LPD Post Drivers
Quiet, low-vibration, one-person power: a hydraulic breaker and its power pack cost less than a compressor-and-breaker package, fit in a van, and run indoors, at night, and underwater.
LH Hydraulic Breakers
Nine models from the LH 180 BSP to the 86-lb LH 400 E. The E models are vibro-reduced with damped chisel bushings — hard breaking at 4.6–5.4 m/s² and noise levels a night permit can live with.
Choose it when: noise or vibration limits rule, the work is indoors or wet, or one operator runs the whole show off a wheeled pack.
Key specs
LP Hydraulic Power Packs
The engine room: Honda-powered petrol packs from 9 to 18 hp, 20–40 lpm, with Power On Demand auto-idle and thermostatic oil cooling. The LP 18 Twin runs two tools at once — two breakers, or a breaker and a pump.
Choose it when: you run any LH breaker, LPD driver, or hydraulic pump — match the pack’s EHTMA class to the tool and go.
Key specs
LPD Hydraulic Post Drivers
Three duty classes driving everything from ground rods to 6-in. guardrail posts: 39-lb LPD-LD (2,300 BPM), the 70-lb LPD, and the 86-lb LPD-HD for 2-3/4–6 in. posts. Guide-tube adapters match each driver to T-posts, pipe, and rod.
Choose it when: fence lines, signposts, guardrail, or ground rods — off an LP pack or your machine’s aux hydraulics.
Key specs
LPP 10HD post puller $3,836 · Hydraulic spike drivers & pick hammers · Post pullers
The Rest of the Atlas Copco Range
Atlas Copco Portable Air Compressors
Portable compressors are the biggest thing Atlas Copco’s Power Technique division builds — and every air tool on this page runs off one. Crowder Supply specs, quotes, and orders the full range, and the under-200 CFM towables that power handheld tools are our bread and butter. Call 1-888-883-5144 for pricing and availability.
Sizing rule of thumb from the spec tables above: one 60-lb breaker wants 64–76 CFM, a sinker drill 106 CFM, and the BBC 16W 146 CFM — then add headroom for hose length and altitude. Our air compressor buyer’s guide covers the math, and diesel tow-behind compressors we stock today ship right off the shelf.
Which Atlas Copco Tool Do I Need?
Breaking concrete with a compressor
Match the weight class to the slab: RTEX if air is tight, TEX 40/60/90 class for pavement and bridge deck.
Pneumatic breakersBreaking or drilling with no compressor
Cobra PROe to break; Cobra Combi to break and drill holes to 6.5 ft. One person, one machine.
Cobra gas familyNight, indoor, or underwater work
LH hydraulic breakers on an LP pack: low noise, low vibration, no exhaust at the tool.
Hydraulic breakersDrilling rock holes
BBD 12/15 for light holes, SRD 25E for vertical production, BBC 16W underground with water flush.
Rock drillsDriving posts, rod, or guardrail
LPD-LD to LPD-HD by post size, guide-tube adapters to fit, LPP 10HD to pull them back out.
Post driversRailroad track maintenance
Cobra TT tamps ties gas-powered; TEX picks drive spikes; LH spike drivers run hydraulic.
Rail toolsSteel, Oil & Parts — on the Same Order
Service kits, pistons, retainers, and labels for the TEX, RTEX, Cobra, and LH platforms are in stock — call with your model and serial number and parts ship same day.
Atlas Copco Questions, Answered
Where can I buy Atlas Copco handheld tools?
Right here — Crowder Supply is a stocking Atlas Copco dealer based in Denver, Colorado, shipping nationwide. Every tool on this page is in our warehouse with its steel, oil, and parts, and our product experts size tools to jobs by phone at 1-888-883-5144.
What is the difference between TEX and RTEX breakers?
TEX is the classic pneumatic paving breaker line, 42 to 95 lb, most models with the vibro-reduced handle. RTEX uses a constant-pressure chamber design that delivers heavy-class breaking energy from a lighter machine on roughly half the air — the 37.5-lb RTEX 15 runs on 32.6 CFM where a conventional 60-lb-class breaker wants around 76 CFM. Tight compressor capacity or vibration-hour limits favor RTEX; lowest purchase price per weight class favors TEX.
What size air compressor do these tools need?
At 90 psi: pick hammers run 36–39 CFM, TEX breakers 53–85 CFM, RTEX 33–46 CFM, BBD rock drills about 47–51 CFM, the SRD 25E sinker 106 CFM, and the BBC 16W underground drill about 146 CFM. Size the compressor with headroom for hose length and altitude — our air compressor buyer’s guide walks through it, and we stock diesel tow-behind compressors to match.
Should I get the Cobra PROe or the Cobra Combi?
PROe if you only break: 44 ft-lb at the tip is the strongest blow in the family. Combi if the same machine must also drill — it trades tip energy (15–18 ft-lb) for a 2,700 BPM drilling action that puts a 7/8 in. hex steel 6.5 ft into granite. Rail crews tamping ties take the Cobra TT instead.
Is this Atlas Copco or Epiroc now?
Both names trace to the same Swedish company, founded in Stockholm in 1873. In 2018 Atlas Copco split off its heavy mining and rock-excavation rig business as Epiroc; the handheld construction tools on this page — TEX, RTEX, Cobra, LH, LP, LPD — remain Atlas Copco products under its Power Technique division.
Do you carry Atlas Copco cordless or assembly drills?
No — those belong to Atlas Copco’s industrial assembly-tool business, sold through different channels. We stock the construction and demolition range: pneumatic, gas, and hydraulic breakers, rock drills, post drivers, picks, rivet busters, pumps, and light towers.
Do you have jackleg drills and pusher legs?
The BBC 16W is the jackleg-class drill in the Atlas Copco range, and we quote BMT 51 and ALF-series pusher legs to pair with it — call for a package. We also stock the American-made BTE Mid-Western S83 jackleg with TUL2B and FL7 feed legs ready to ship, if you want a complete jackleg setup off the shelf.
What runs the hydraulic tools?
An LP power pack — petrol, or the Twin that feeds two tools at once — or the auxiliary hydraulics on your skid steer, mini excavator, or tractor if flow and pressure match. Tools and packs carry EHTMA class letters (C through E on this page); match the letters and the pairing is right.
Do you stock steel, oil, and parts for these tools?
Yes. Moil points, chisels, asphalt cutters, and clay spades in 1-1/8 x 6 and 1-1/4 x 6 in. shanks, hex drill steel for every chuck on this page, factory air-tool oil and Cobra 2-stroke oil, plus service kits and wear parts for the TEX, RTEX, Cobra, and LH platforms. One order, one shipment.
Do you sell Atlas Copco air compressors?
We quote and supply the full Atlas Copco portable compressor range on request — from the 110 CFM XAS 110 and U 110 through the XATS 250 PACE to the 400–950 CFM machines and high-pressure DTH units. The under-200 CFM towables that run handheld air tools are our specialty; call 1-888-883-5144 for current pricing and lead times, or shop the diesel compressors we stock today.
How fast do Atlas Copco tools ship?
In-stock tools ship same day. Most air tools and accessories go free by UPS Ground; heavier machines ship flat-rate Freight. Order by 4 PM Eastern and it is on the truck today.
Put an Atlas Copco Tool to Work
Tell us the material, the hole or the post, and what powers your site — we will match the tool, the steel, and the compressor or pack in one call.