Our SBU breakers are used for road work, trenching and demolition, as well as in primary and secondary rock breaking. It has an air injection porting for under water breaking.
ADVANTAGES
- High back pressure acceptance
- Tough and reliable
- Light weight, high performance
FEATURES
Our unique design concept with a SolidBody stands for high reliability, extreme versatility, high efficiency and performance, and is known as very maintenance friendly.
- SolidBody Concept - Integrates percussion mechanism and guide system into a single block of special cast iron, decreasing the total number of parts. It also eliminates conponents, like damping and guiding elements and tie rods or stud bolts completely and results in an extremely slim and ompact shape to simplify handling. A replaceable piston liner supports low repair costs.
- Energy Recovery - The pistion recoil energy is automatically utilized to increase the performance without additional hydraulic input and to lower vibrations.
- Air and Water Inlet - To connect compressed air supply and an integrated water channel for dust suppression.
- ContiLube™ II or ContiLube™ II Micro - Our self-priming lubraicton pump with adjustable grease volume, directly mounted on the hydraulic breaker, for uninterruped operation and optimized lubrication.
- Floating Bushing - Tool bushing with floating fit for easy exchange on-site with standard tools.
- Pressure Relief Valve - Built-in valve to protect against overloads
- Dust Wiper - Integrated dust wiper to extend service life of bushing and retainer bars
- Auto Start - The hydraulic breaker starts without load applied to working tool thus simplifying handling
- Patented Tool Locking System - Combining a lock buffer and solid pin for quick tool exchange.
* Prices apply to standard OEM pin-on bracket, or Wain Roy / C&P-style quick coupler for backhoe and excavator mounting within recommended carrier weight range
Ships with Universal mounting bracket, hydraulic hose set and 3" Cross Chisle or Moil Point.
SPECIFICATIONS
| Carrier Weight Class¹ |
lbs |
6000-13,000 |
| Service Weight² |
lbs |
500 |
| Working Tool Diameter |
in |
2.56 |
| Working Tool Length |
in |
12 |
| Hydraulic Input Power, Max |
Hp |
25 |
| Oil Flow |
gpm |
11.1-19.8 |
| Operating Pressure |
psi |
1450-2175 |
| Impact Rate |
bpm |
750-1400 |
| Sound Power Level Guaranteed (ISO 3744 2000/14/EC) |
dB(A) |
118 |
¹ Weights apply to standard carriers only. Any variances must be agreed with Epiroc and/or the carrier manufacturer prior to attachment.
² Attachment with standard working tool* & average-sized adapter plate
CONSUMABLE TOOLS
| |
|
|
Width (in) |
Working Length (in) |
Total Length (in) |
Weight (lbs) |
| Moil Point - Conical* |
3083316206 |
|
- |
12.99 |
24.8 |
28.66 |
| Cross Chisel - 3"* |
3083316105 |
|
2.56 |
12.99 |
24.8 |
30.86 |
| Blunt Tool |
3083341105 |
|
- |
12.99 |
24.8 |
33.07 |
| Shaft |
3315370205 |
|
- |
|
24.8 |
46.3 |
| Wide Cross Chisel - 5" |
3083316300 |
|
5.12 |
13.78 |
25.6 |
35.27 |
| Wide Parallel Chisel - 5" |
3083316700 |
|
5.12 |
13.78 |
25.6 |
35.27 |
| Asphalt Cutter - Cross |
3083340946 |
|
5.51 |
13.78 |
25.6 |
35.27 |
| Asphalt Cutter - Indexed 90° |
3083340947 |
|
5.51 |
11.02 |
25.6 |
35.27 |
| Square Tamping Pad |
3315370900 |
|
11.81 |
|
|
1.3 |
| Round Post Driver Pad |
3315371700 |
|
5.9 |
|
|
.83 |
| Round Pile Driver Pad |
3315372300 |
|
3.9 |
|
|
.35 |
| Round Bushing Pad |
3315373000 |
|
5.1 |
|
|
.38 |
| Moil Point - X Profile Proline |
3363120263 |
|
- |
23.62 |
35.43 |
28.66 |
| Chisel - X Profile Proline |
3363120264 |
|
2.56 |
23.62 |
35.43 |
28.66 |
DOCUMENTS
| Spare Parts List |
| Safety and Operating Instructions |
| Short Operation & Daily Maintenance Manual |
ACCESSORIES & COMMON REPLACEMENT PARTS
Optional Mounting Brackets
| Standard SkidSteer - 48" SSL Universal Bracket |
| Standard SkidSteer Combo - 48" SSL Universal Bracket and Backhoe/Excavator Bracket |
